| Radial Ventilator
|
|
|
|
| The fans of GÖKSER MAKİNA are manufactured with 12 years of experience and highest technology in line with the world fan standards. Fan impellers are designed to yield greatest efficiency.
Fans are produced from either of the following materials according to their size, angular speed and to the conditions of the environment.
- Aluminium
- Galvanic
- Hard Aluminium
- DKP sheet
All radial fans with blades with forward bent are manufactured using riveting method. Their static and dynamic balance is obtained through electronic balance machines.
Fans are produced according to the demands which are different from the standart dimensions.
VENTILATORSGenerally, the ventilators are divided into three groups:- Radial ventilators
- Axial - flow ventilators
- Vertical - flow ventilators
In radial ventilators air is led through the ventilator in the axial form leaves it ridailly. Here, the test of the impeller is to transform some amount of the air speed into pressure. The blades of the radial ventilators are designed either with backward bent or forward bent. Radial fans with forward bents have the less volume and efficiency than the fans with backward bent. Radial ventilators with fans with backward bent are handler for dust or particle transport. Since airflow is over the blade inclination, it is impossible for the dust or particles to block the space in between the blades.Radial ventilators with blades with forward bent are more advantageous concerning their size. Middle size capacity and pressure values are obtained using ones of smaller sizes.Only the axial-flow ventilators are called "ventilators" for the purpose of practicality. Radial ventilators are called "fan". | | 
|
|
| |
|
Radial Ventilator